Skip to main content
  Toll Free:  1-800-565-2599  ||    24-Hour Fax: (416) 739-9506  ||    info@brickstopedge.com

GRABO PRO-Lifter 20 #530

The GRABO Pro tools come with a smart digital pressure sensor, digital display and smart settings for both weight and pressure.

      GRABO PRO-Lifter 2.0 kit includes

      GRABO Pro-Lifter comes as a complete unit, with pre-installed battery and vacuum seal.

      That is not all. There are other accessories in the kit, including a multi-socket charger and a heavy duty carry bag.  The complete kit is packaged in a functionally designed colorful box.

      Package Contents:

      • 1 GRABO Pro tool (2021 model with digital display)
      • 1 multi-socket charger
      • 1 seal (preinstalled on the tool)
      • 1 battery (preinstalled on the tool)
      • 1 tough Oxford fabric carry bag
      • Operator’s manual in English

      GRABO Pro is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong enough to hold firm even loads as heavy as 375 lbs . In order to lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost the pump is automatically powered up until the vacuum pressure is restored.

      The GRABO Pro-Lifter is designed for professionals. Unlike the other gigantic solutions, the tool is portable and handy. Living up to the promise of “Heavy Lifting – Made Easy”, the GRABO Pro is equally effective on smooth as well as coarse surfaces. The Pro-Lifter has a pumping capacity of 20 liters per minute, a best in class. So, say good-bye to unreliable, and often dangerous, manual suction cups for the job. With GRABO Pro you double your work efficiency with enhanced safety.

      The tool is ergonomically designed to provide better grip and less fatigue when moving heavy objects. The tool is an effective vacuum lifter even for dusty, semi-porous or rough surfaces. The tool works perfectly with glass, wood, ceramic tiles, metals and other materials. Just like the Classic version the powerful vacuum pump and rechargeable battery pack are concealed within the grab handle. 

      The handle is also equipped with a digital display that shows the maximum weight that the GRABO Pro can safely lift at that very moment. The weight is displayed in both pounds and kgs. 

      The Pro-Lifter is equipped with a smart digital pressure sensor. This makes it even more effective on different surfaces. With a simple press of a button the lifting function is automatically activated and regulated. The sensor automatically provides for the optimum level of suction, keeping objects in complete control whether the object is being lifted or even during movement. 

      The digital display on the grab handle shows the pressure applied in both bars and psi. With the pressure sensors, you don’t have to worry about turning the vacuum pump on or off. In fact, the automatic sensor is especially useful when lifting and moving coarse materials. The sensors digitally detect and maintain the required pressure while transferring the object being lifted  . This provides for precision handling and installation without too much of a hassle. In any case the sensor automatically stops the pump on reaching maximum vacuum capacity of 11.6 PSI.

      However, if you want to lift and move objects that have lighter mass, then the vacuum pump can be turned off. When you want to remove the tool from the object you simply push the red vacuum release button. 

      The tool operates on 14.8 volts 2600 mAh Li-ion removable battery. The battery takes two hours for a full charge. On a full charge, this powerful battery can last for 900 cycles or 1.5 hours on non-stop running. The battery lasts for a whopping 30 days on standby mode.

      Just like the Classic model, GRABO PRO is also equipped with four lifting lugs placed on both sides of the grab handle. These lugs become handy in case the tool is to be used with additional grips or straps for support. 

      The GRABO Pro has been rigorously tested by professionals around the world. Given its compact design and competitive performance, the Pro Lifter is rapidly becoming a tool of choice, especially in the construction industry around the world.

      Specifications:

      Model/SKU GRABO PRO-LIFTER 20 / GP-1Li-FB
      Battery 14.8VDC 2600mAh Li-ion
      Rated Power 16W
      Charger Input Voltage 100-240VAC 50/60Hz
      Battery Charging Time ~2hrs
      Non-Stop Running Time (Full Charge) 1.5hrs
      Running Cycles (On Full Charge) 900 ON-OFF cycles of 10 seconds
      Stand-by Mode (Charge Hold) 30 days
      Pump Service Life 100000+ ON-OFF cycles / 800+ hrs continuous
      Rated Air Flow 0.7cfm (20 L/min)
      Maximum Vacuum Rate 11.6Psi (0.8 Bar, 80 kPa)
      Maximum Lifting Capacity 375Lbs (170 kg)
      L x W x H 11.77 x 7.22 x 4.76” (300 x 184 x 121 mm)
      Net Weight (With Battery) 3.2Lbs ( 1.5 kg )
      Working Temperature 32°F~140°F ( 0°~60 °C )
      Applicable Surface Type Peak/valley heights less than 0.1” (3mm),
      arc less than 5°
      Additional Features Pump stops automatically at maximum vacuum
      rate ( 11.6Psi / 0.8 Bar )